服务热线：0512-63672818
ff
| 应用指南 | 执行标准Standard | GB/T 23257-2009，SY/T 0413-2002，EN12008 | ||
| 温度等级Temperature Degree | TS50(Mastic) | TS60 | TS80 | |
| 最大运行温度Max Operating Temperature | 60℃ | 70℃ | 85℃ | |
| 适用外防腐涂层Suitable Coating | PE,FBE,PP | PE,FBE,PP | PE,FBE,PP | |
| 钢管预热温度Preheat Temperature to Steel | 60℃ | 75℃ | 85℃ | |
| 推荐除锈等级Rust Cleaning Degree | Sa2.5,St3.0 | Sa2.5,St3.0 | Sa2.5,St3.0 | |
| 主要参数 | 性能Property | 测试方法Test Method | TS50(Mastic) | |
| 典型值typical | ||||
| 底漆Epoxy Primer | ||||
| 固体含量（%）Solid Content | GB/T 1728 | 99.5 | ||
| 阴极剥离(65℃,48h)(mm)Cathodic Disbonding | Q/SY GJX0113-2007(附录D) | 8 | ||
| 基材Backing | ||||
| 拉伸强度 (MPa)Tensile Strength | GB/T 1042-92 | |||
| 断裂伸长率 (%)Elongation | GB/T 1042-92 | |||
| 介电强度 (MV/m)Dielectric | GB/T 1408.1-99 | |||
| 体积电阻率 (Ω.m)Volume Resistance | GB/T 1410-89 | |||
| 吸水率 (%)water absorption | ASTMD 570-2005 | |||
| 热老化（150℃,21天）Thermal aging | ||||
| 拉伸强度 (MPa)Tensile Strength | GB/T 1042-92 | |||
| 断裂伸长率 (%)Elongation | GB/T 1042-92 | |||
| 耐紫外线老化 EN12068 | ||||
| 断裂伸长率 (%)Ultraviolet aging resistance | GB/T 1042-92 | |||
| 热熔胶Adhesive | ||||
| 软化点（℃）Softening Point | GB/T 4507-85 | |||
| 低温韧性low-temperature toughness | ||||
| 安装后热收缩套 | ||||
| 剥离强度 23℃ GB/T 2792-98 Peel strength | ||||
| 对底漆钢 （N/cm）PRIMER STEEL | --------- | |||
| 对PE（N/cm） | --------- | |||
| 阴极剥离(70℃,30d)(mm)Cathodic Disbonding | SYT 0413-2002 | |||
| 热水浸泡Hot water immersion | ASTMD 870-2002 | |||
| 产品规格 | 钢管外径Pipe Outside Diameter | φ108-2200mm | 其它规格可定制 | |
| 产品宽度width | 100-720mm | |||
| 基材厚度Backing thickness | 1.0-1.5mm | |||
| 胶层厚度Adhesive thickness | 0.8-2.0mm | |||
| 举例：TS60φ219/30×500-1.2/1.0 | ||||
| 适用温度等级通常50度2PE和60度3PE结构默认不写 | ||||
微信订阅号
微信服务号
