ff
应用指南 | 执行标准Standard | GB/T 23257-2009,SY/T 0413-2002,EN12008 | |||||
温度等级Temperature Degree | WSS50(Mastic) | ||||||
最大运行温度Max Operating Temperature | 60℃ | ||||||
适用外防腐涂层Suitable Coating | PE,FBE,PP | ||||||
钢管预热温度Preheat Temperature to Steel | 60℃ | ||||||
推荐除锈等级Rust Cleaning Degree | Sa2.5,St3.0 | ||||||
主要参数中文 | 性能Property | 测试方法Test Method | |||||
底漆Epoxy Primer | |||||||
固体含量(%)Solid Content | GB/T 1728 | ||||||
阴极剥离(65℃,48h)(mm)Cathodic Disbonding | Q/SY GJX0113-2007(附录D) | ||||||
基材Backing | |||||||
拉伸强度 (MPa)Tensile Strength | GB/T 1042-92 | ||||||
断裂伸长率 (%)Elongation | GB/T 1042-92 | ||||||
介电强度 (MV/m)Dielectric strength | GB/T 1408.1-99 | ||||||
体积电阻率 (Ω.m)Volume Resistance | GB/T 1410-89 | ||||||
吸水率 (%)water absorption | ASTMD 570-2005 | ||||||
热老化(150℃,21天)Thermal aging | |||||||
拉伸强度 (MPa)Tensile Strength | GB/T 1042-92 | ||||||
断裂伸长率 (%)Elongation | GB/T 1042-92 | ||||||
耐紫外线老化 EN12068 Ultraviolet aging resistance | |||||||
断裂伸长率 (%)Elongation | GB/T 1042-92 | ||||||
热熔胶Adhesive | |||||||
软化点(℃)Softening Point | GB/T 4507-85 | ||||||
搭接剪切强度 (MPa) Lap Shear | ASTM D1002-05 | ||||||
低温韧性low-temperature toughness | |||||||
安装后热收缩带 | |||||||
剥离强度 23℃ GB/T 2792-98 Peel strength | |||||||
对底漆钢 (N/cm)PRIMER STEEL | --------- | ||||||
对PE(N/cm) | --------- | ||||||
阴极剥离(70℃,30d)(mm)Cathodic Disbonding | SYT 0413-2002 | ||||||
热水浸泡Hot water immersion | ASTMD 870-2002 | ||||||
产品规格 | 钢管外径Pipe Outside Diameter | φ108-2200mm | |||||
产品宽度width | 100-720mm | ||||||
基材厚度Backing thickness | 1.0-1.5mm | ||||||
胶层厚度Adhesive thickness | 0.8-2.0mm | ||||||
举例:WSS60φ219/30×500-1.2/1.0 | |||||||
适用温度等级通常50度2PE和60度3PE结构默认不写 |